SUZHOU SHENGBAIWEI PACKAGING EQUIPMENT CO.,LTD

EN

SUZHOU SHENGBAIWEI PACKAGING EQUIPMENT CO.,LTD
EN
ホーム > ブログ> Shrink packaging machine operating procedures and precautions

Shrink packaging machine operating procedures and precautions

December 08, 2022
1. Close the left power switch;

2. Close the side thermal switch and adjust the side thermal knob to about 4-5 gears;

3. Combine the upper and lower thermal switches and adjust the lower hot knob to about 4-5 gears;

4. Close the conveyor switch and adjust the conveyor knob to about 4-5 gears;

5, adjust the heating temperature (can be set at about 130 ° C);

6. After the above operation is completed, let the machine run for about 3 minutes and then close the hot air switch (the hot air switch can not be opened in the actual operation);

7. Put the items that have been fitted with the shrink film, and then shrink packaging;

8. In the actual situation, if there are too many wrinkles after shrinking, the conveying speed can be reduced or the heating temperature can be increased. Conversely, if the shrinkage phenomenon occurs, the temperature can be lowered;

9. After the packaging is finished, first turn off the three-stage heating switch, but the conveying motor and the hot air motor continue to run for about 10 minutes, and then cut off the entire power supply.

Attention should be paid to the operation of the heat shrink packaging machine:

1. The heat shrink packaging machine is a (220v/380v voltage) single-phase/three-phase four-wire system, in which the neutral wire must be connected to the machine, otherwise the machine cannot operate normally;

2, the machine has a stainless steel heating tube, installed on both sides, very bright red when heating;

3. Note that the temperature of the shrinkage chamber should be controlled below 230 °C (sixth gear). If it is operated at over temperature, the circuit will prematurely age and the life of electrical components will decrease.

4. When the shrinking machine is used for more than three months, the aging of the wire in the shrinkage room should be checked and replaced as appropriate.

The classification of shrink packaging machines is divided into drying tunnel shrinking machine, oven shrinking machine, frame shrinking machine, gun shrinking machine, heat shrinking machine, bagging packaging machine, shrink packaging machine, film packaging machine, heat according to the type of machine. Shrink packaging machine, heat shrink film packaging machine, automatic heat shrink packaging machine, etc.
前
次の
お問い合わせ

Author:

Mr. SEAN

Eメール:

SEAN@SBWPACK.COM

Phone/WhatsApp:

+8618662553122

人気商品
企業ニュース
ようこそ117th China Dayn-Use Recorts Trade Fairをご覧ください
ようこそ117th China Dayn-Use Recorts Trade Fairをご覧ください

July 18, 2024

2024年に展示します。プロパク上海、お願いします。
2024年に展示します。プロパク上海、お願いします。

June 20, 2024

You may also like
Related Categories

この仕入先にメール

タイトル:
イーメール:
メッセージ:

Your message must be betwwen 20-8000 characters

お問い合わせ

Author:

Mr. SEAN

Eメール:

SEAN@SBWPACK.COM

Phone/WhatsApp:

+8618662553122

人気商品
企業ニュース
ようこそ117th China Dayn-Use Recorts Trade Fairをご覧ください
ようこそ117th China Dayn-Use Recorts Trade Fairをご覧ください

July 18, 2024

2024年に展示します。プロパク上海、お願いします。
2024年に展示します。プロパク上海、お願いします。

June 20, 2024

Blog News
How to Choose Automatic Carton Loading Machine?
How to Choose Automatic Carton Loading Machine?

January 23, 2024

The Application of Automatic Carton Loading Machine
The Application of Automatic Carton Loading Machine

January 23, 2024

Please Leave Us A Message

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

添付ファイルをアップロードします
送信